Certification & Testing
Certified Performance Tests
Wright Flow Technologies provides pump performance testing & certifications for your application needs. We offer these standard options as well as fully customized testing for your most demanding requirements. Wright Flow Technologies is your hygienic solutions provider.
Pump Performance |
Surface Finish |
General Compliance |
Pump Assembly |
Media Contact Metallic Components |
Certified Documents |
Media Contact Elastomers |
ATEX & CE |
Seal Faces |
|
Pump Testing
PUMP TEST REPORT 3.1 |
Report that records actual pump performance figures to a standard test procedure and in accordance with the requirements of BS EN ISO9001:2000 Clause 7.3.5, verification of processes for production and service will be conducted on water. |
PUMP PERFORMANCE CURVE 3.1 |
Wright Flow generated pump performance curve produced from actual referenced pump test results, as above. |
HYDROSTATIC PRESSURE TEST 3.1 |
Wright Flow generated hydrostatic test certificate that certifies that the pump head has been hydrostatically tested using water at 1.5 times pump pressure rating for a period of ten minutes. |
INSP CERT NOISE 3.1 STD |
Wright Flow generated inspection certificate that certifies for the pump identified the ambient noise at rest and recorded noise in dB during the pump test at a specified RPM and pressure (BAR). |
Certifications
GENERAL COMPLIANCE - Pumps, Spares, Repairs
DECL'N of COMPLIANCE 2.1 |
Wright Flow generated declaration of compliance that states Wright Flow Technologies certifies the supply, as identified and referred to, are in compliance, unless otherwise stated, with the drawings and specifications as ordered. |
MEDIA CONTACT METALLIC COMPONENTS
INSP CERT MEDIA METALLICS 3.1 | Wright Flow generated 3.1 material traceability cross reference document that lists the media contact metallic components and associated references, and is supported by vendor issued EN 10204 3.1 certification. |
INSP CERT FERRITE 3.1 | Wright Flow generated 3.1 inspection certificate that records the ferrite content at the surface of the media contact metallic components. |
MEDIA CONTACT ELASTOMERS
DECL'N of COMP FDA/EPDM 2.1 | A declaration of compliance issued by the vendor that confirms compliance of the supply with the specifications for the components as referenced. |
DECL'N of COMP FDA/VITON 2.1
DECL'N of COMP USP CLASS VI 3.1 | Wright Flow generated 3.1 traceability cross reference document that lists the media contact elastomer components references, and is supported by vendor issued certification. |
SEAL FACES
DECL'N of COMP FACE FDA 2.1 | A declaration of compliance issued by the vendor that confirms compliance of the supply with the specifications for the components as referenced. (Ceramic faces only) |
SURFACE FINISH
INSP CERT SURFACE FINISH 3.1 | Wright Flow generated inspection certificate that records the surface finish of the media contact metallic
component surfaces exposed to the media, in micro meters (μM) or micro inches (μin) roughness average (RA). |
DECL'N of COMP E/POLISH 2.1 | A declaration of compliance issued by the vendor that confirms compliance of the supply with the specifications for the components as referenced. |
DECL'N of COMP PASSIVATION 2.1 | A declaration of compliance issued by the vendor that confirms compliance of the supply with the specifications for the components as referenced. |
PUMP ASSEMBLY
IN PROCESS INSPECTION REPORT 3.1 | Wright Flow generated document that records the in process inspection checks during the manufacturing process. |
DOCUMENTS
CERTIFIED GA DRG | Wright Flow generated general arrangement drawing that references the specific pump identified and is authenticated by the engineering department. |
ATEX & CE
DEC of INCORPORATION - 98/37/EC | Wright Flow generated declaration of incorporation covering the supply of a bare shaft pump. |
DEC of CONFORMITY - 98/37/EC | Wright Flow generated declaration of conformity covering the supply of a motorized pumpset. |
DEC of INCORPORATION - CE | Wright Flow generated declaration of incorporation covering the supply of a bare shaft pump. |
DEC of CONFORMITY - CE | Wright Flow generated declaration of conformity covering the supply of a motorized pumpset. |
MISC RE
CERT of COMP MOTOR 2.1 | Vendor originating certificate of compliance that confirms motor compliance. |
CERT of COMP LUBRICANT 2.1 | Vendor generated material safety data sheet shows compliance with FDA 21 CFR 178.3570. |
** Additional Tests or Certifications Upon Request **